Switches & Sensors Selector: Compare Models

How to use this selector

The Switches & Sensors line covers several different part types that connect to the vehicle in different ways. Use this table as a selector:

Filter by type — dashboard switch / control, in-vehicle sensor, passenger request button, remote key fob, or high-voltage pack protection.
Filter by interface — how it connects: CAN bus, hard-wired, RF wireless, or an analogue sensor signal.
Filter by supply voltage — 12 V or 24 V nominal, wide-range platforms that cover both, self-powered battery parts such as TPMS sensors and RF buttons, or supplies confirmed against your programme.
Follow the model link — full-spec rows open a detail page; rows marked Catalog listing jump to the matching family card so you can request the current datasheet. For switch-panel architecture, see the CAN bus switch panel guide.

Switches, buttons and CAN panels are built to order under one IATF 16949 quality system. TPMS sensors and RF buttons pair with their Youlai receivers (EBX-957 / EBX-2404).

Reference specs, not a datasheet — confirm the exact build for your programme in an RFQ.

Sealing column. Codes mix IEC 60529 and ISO 20653 (K) — not interchangeable; the water digit is not a ladder (jets ≠ immersion). Dual-scheme parts such as TDK-2513 / 2514 carry one code from each. Full walkthrough in our guide to IP ratings.

Switches & sensors product selector
Model	Type	Voltage	Interface	Sealing	Best for
EDK-907CAN switch panel	Switch	18–32 VDC	CAN + hard-wire backup	IP53	Heavy-truck cab dash
EDK-25074-button CAN rotary switch	Switch	9–32 VDC	CAN 2.0 (Deutsch DT06-4S)	IP66	Heavy truck · machinery dash
EDK-2403Dual-rotary CAN switch (nav + press-to-start)	Switch	18–32 VDC	CAN bus (Deutsch DT06-4S)	IP65	Commercial-vehicle · machinery dash
EDK-908Door & window control switch	Switch	18–32 VDC	LIN + outputs · MG610054 + DJ7101-1.0-21	Confirm for programme	Door panel · window + mirror + lock
EDK-908BDoor & window control switch	Switch	9–32 VDC	CAN + 24 V / 500 mA hardwire	Confirm for programme	Commercial vehicle · passenger car door
EDK-914LIN-bus power-window switch (single + dual button)	Switch	18–32 VDC	LIN + window-lift switching	IP53	Cab door · window up/down + central lock
EDK-23194-way powered mirror switch	Switch	18–32 VDC	Hard-wired	Confirm for programme	Heavy truck · bus mirrors
TDK-2307Rotary side-mirror switch	Switch	18–32 VDC	Hard-wired	Confirm for programme	Commercial-vehicle mirrors
JDK-2425Emergency stop switch	Switch	9–32 VDC	Hard-wired (2 × C/NC, 1 × C/NO)	IP67	Machinery · emergency stop
JDK-2201Sealed 3-position toggle switch	Switch	9–32 VDC	Hard-wired · ON-OFF-ON (15/25 A)	IP67	Exposed panel selector
JDK-901Rocker switch with protective cover (gangable)	Switch	9–32 VDC	Hard-wired · 8 blade terminals (8-/2-wire boots)	IP53	Dashboard rocker cluster
TDK-902 / 905Engine start-stop push button (902 immobiliser / 905 standard)	Switch	18–32 VDC	Hard-wired (902 AMP 2005496-1; 905 Molex 43025-1000)	IP53	Commercial-vehicle · machinery start
EDK-2010Cab door-panel switch (cab-tilt / ground-level start-stop / hazard)	Switch	9–36 VDC	Hard-wired (4 functions, 2 terminals each; Molex 8-way)	IP67	Heavy-truck cab door
EDK-2006Light & instrument combination switch (headlight / dimmer / eco + button)	Switch	18–32 VDC	Hard-wired (3 rotaries + button; AMP 12-way)	IP5KX	Dash-centre light control
TDK-2513 / 2514Cab switches (illuminated round button + pre-ignition switch)	Switch	24 V system	Hard-wired (TE 929504-1 4-way / Molex 43645-0300)	IP5K2 / IP57	Cab dashboard controls
TDK-904CNG / ESP dashboard switch (CNG fuel-mode select + ESP off)	Switch	18–32 VDC	Hard-wired (2 signals; AMP 1419158-1 6-way)	IP53	CNG / bi-fuel dashboard control
TDK-901Hazard warning switch (copper-blade sliding contacts, no PCB)	Switch	9–32 VDC	Hard-wired (DJ7081-2.3-21 8-way)	IP52	Dashboard hazard control
TDK-2202/2203Power-window & central-lock switch (master + single)	Switch	9–16 VDC	Direct motor drive (25 A) + LIN	Confirm for programme	Car / NEV door · window + lock
TDK-2408Bidirectional travel pedal	Switch	8–32 VDC	CAN · DTM06-6S	IP65	Machinery · travel / drive pedal
EDK-911Electronic steering column lock (ESCL)	Switch	18–32 VDC	Motor supply, LIN, memory supply B+, unlock, enable, ground · AMP 2-1379816-4	Confirm for programme	PEPS anti-theft · column lock
EDK-916Rotary gear selector (R / N / D / S)	Switch	12 VDC	Hard-wired · active-low R/N/D/S · TE 174045-2	Confirm for programme	Rotary gear selector
EDK-2213Electronic parking brake paddle + Auto Hold button in one console bezel	Switch	9–32 VDC	CAN + 500 mA hardwire output	Confirm for programme	EPB & Auto Hold console control
TDK-2419Bus EDSS emergency-stop unit	Switch	9–32 VDC	Hard-wired · Sumitomo 6098-5310 + 6098-0240	IP5K2	New-energy bus · passenger-area EDSS
TDK-2308 / 2515 / 2418In-cab AC outlets: Korean / European detail + Japanese on-request variant	AC outlet	AC 220 / 230 V	Hard-wired (LS / JONHON connector)	Confirm for programme	In-cab equipment power
EDK-913Catalog listingButton panel · interface and configuration per programme	Switch	Per programme	Per programme	Confirm for programme	Cab button panel
TDK-2420Catalog listingBus panel switch · CAN or LIN per programme	Switch	Per programme	CAN / LIN	Confirm for programme	Cab switch panel
EDK-905Catalog listingMulti-function switch cluster	Switch	Per programme	Per programme	Confirm for programme	Cab multi-function control
JDK-2307Catalog listingInstrument-panel module / HMI trim	Control panel	Per programme	Per programme	Confirm for programme	Instrument-panel integration
TDK-903Catalog listingHeadlamp leveller switch	Switch	Per programme	Hard-wired	Confirm for programme	Headlamp levelling
TDK-906 / 907 / 908Catalog listingDoor-lamp switch variants	Switch	Per programme	Hard-wired	Confirm for programme	Door / courtesy lighting
EDK-912Catalog listingLighting switch	Switch	Per programme	Hard-wired	Confirm for programme	Cab lighting control
EDK-915Catalog listingLight + cluster combination switch	Switch	Per programme	Per programme	Confirm for programme	Cab combination control
YDK-902Valve-stem TPMS sensor	Sensor	Battery (2.5–3.3 V)	RF 433.92 MHz → EBX-957	IP66	Standard-rim wheels
YDK-903Clamp-mount TPMS sensor	Sensor	Battery (2.5–3.3 V)	RF 433.92 MHz → EBX-957	IP66	Mining / special rims
CGQ-024ALight + rain sensor (024A-SYN)	Sensor	12 VDC and 24 VDC	CAN · Deutsch DT04-4P	Confirm for programme	Auto wipers + headlamps
CGQ-012AAmbient-light sensor assembly	Sensor	4.5–5.5 V	Low-level output, pin 2 (LSD)	IP53	Ambient light; temperature and sunlight pins reserved
YL02-WK seriesTemperature switch — 30–155 °C in 5 °C steps, NO/NC	Sensor	Unpowered · contact 4 A @ 12 V / 3 A @ 24 V	Dry contact · AMP 282080-1 2-way	IP67	Engine · transformer · general equipment
CGQ-024BCatalog listingLight + rain sensor variant	Sensor	Per programme	Per programme	Confirm for programme	Auto wipers + headlamps
FMQ-024A-BCatalog listingBuzzer / acoustic annunciator	Annunciator	Per programme	Hard-wired	Confirm for programme	Vehicle audible warning
JDK-2306Wired stop-request button (braille)	Button	9–36 VDC	Hard-wired	IP5K2	Bus · accessibility
TDK-2406/2407Wireless stop-request button	Button	Battery (2.8–3.2 V)	RF 433.07 MHz → EBX-2404	IP5K2	Bus · retrofit stop-request
JDK-2207Catalog listingStandard bus stop-request button	Button	Per programme	Hard-wired	Confirm for programme	Bus passenger request
JDK-2209Catalog listingAccessible passenger stop-request button	Button	Per programme	Hard-wired	Confirm for programme	Bus accessibility
YDK-2401Remote key fob (RKE)	Remote	3 V	RF 433.92 MHz (one-way) → RKE receiver/BCM	IP54	Keyless entry · lock / unlock / find-car
EDK-2116Catalog listingDoor switch	Switch	Per programme	Per programme	Confirm for programme	Bus / coach door control
EDK-2009 / 2212Catalog listingDoor-module switch variants	Switch	Per programme	Per programme	Confirm for programme	Door-module input
TDK-2302Catalog listingDoor / mirror switch variant	Switch	Per programme	Per programme	Confirm for programme	Bus / coach cab control
TDK-2306Catalog listingDoor / mirror switch variant	Switch	Per programme	Per programme	Confirm for programme	Bus / coach cab control
JDK-2509EV battery-pack fuse	HV protection	DC 1500 V (traction)	Bolt-in HV bus	Sealed cartridge (no housing IP)	EV battery-pack protection

Swipe the table sideways to see every column.

Download the switches & sensors line card (PDF) Printable A4 of this table. If the sheet and this page differ, this page is correct.

Narrowed your part shortlist? Send the model(s), voltage, interface and switch legend or sensor signal — we reply with the closest datasheet and quote. Lines, test rigs and programme steps are on the CAN switch panel and sensor manufacturer pages.

Ask on WhatsApp Email details

Reference builds only; final legend, backlight, connector and pairing details are set per programme.

Common questions

CAN switch panel or hard-wired switch — which is better?

Use a CAN switch panel when the cab already has a body network and you want fewer hard wires, configurable messages and software-defined key functions. Use a hard-wired switch when the function is simple, local and cost-sensitive.

How do I choose between wired and wireless stop-request buttons?

Wired buttons are the default for new bus builds with planned harness branches. Wireless buttons reduce harness work for retrofit or accessibility positions and pair with the EBX-2404 receiver.

What is the difference between CGQ-024A and CGQ-012A?

CGQ-024A is a light-and-rain sensor for automatic wipers and headlamps. CGQ-012A is an ambient-light assembly: the defined output is a low-level signal on pin 2, and the temperature and sunlight pins are reserved. Its supply is 4.5–5.5 V.

What do you need to quote switches or sensors?

Target vehicle, system voltage, interface type, switch legend or sensor signal, sealing requirement, connector preference, annual volume and target SOP date. For wireless parts, include the receiver and pairing count.

Get in Touch

Talk to Our OEM Project Team

Typical reply within one business day. A model number, or one line on what you need, is enough.

Vehicle, volume and other details are optional.

Switches & Sensors Selector

How to use this selector

Common questions

CAN switch panel or hard-wired switch — which is better?

How do I choose between wired and wireless stop-request buttons?

What is the difference between CGQ-024A and CGQ-012A?

What do you need to quote switches or sensors?

Talk to Our OEM Project Team

WhatsApp

Email

Phone

WeChat